| Article #344 - How do I restore factory defaults on the TC2677 |
|---|
| Updated:02-18-2006 - Views: 414 |
| Recessed in the back side of the TC2677 are two small switches, used as follows:
Switch 1 is normally in the up position. Powering off the TC2677, throwing switch 1 to the down position and powering on the TC2677 will cause the TC2677 to restore factory defaults. With switch 1 in this position, the TC2677 will beep every second or two. Once the TC2677 has completely powered on with switch 1 in the down position, again power off the TC2677, throw switch 1 to the up postion and power on the TC2677. Switch 2 is for either a color or a monochrome CRT. Up selects color and down selects monochrome. Make certain this switch is set correctly or the CRT output may well be unacceptable. |
| Let us know how this article helped you or how it can be improved by submitting a comment. |