I-O 5735km « I-O Corporation

I-O 5735km

The I-O 5735km IPDS/SCS Printer Gateway is a high speed Ethernet-in, Ethernet-out gateway that connects a single Kyocera printer or MFP to an IBM AS/400, iSeries, eServer i5 or S/390 zSeries host. Supports Kyocera’s finishing features.

General Info Features & Benefits Specifications Downloads

The I-O 5735km Gateway is a high speed Ethernet-in, Ethernet-out print server designed to convert native IBM host print jobs to PCL, allowing them to be printed on a single Kyocera printer. The I-O 5735km Gateway delivers IBM AFP/IPDS and SCS printing via Ethernet, and provides the control and printer feedback found in an IBM host environment. In addition to IBM host connectivity, the I-O 5735km Gateway supports Kyocera's value added finishing features.

Supports finishing features: duplexing, collating, stapling, hole punching, etc.
Supports Advanced Function Printing (AFP) using IPDS protocol
Also supports standard Host printing using SCS protocol
High Speed printing - over 100 pages per minute
Supports over 100 AFP/IPDS Fonts
10 / 100 Mbps Ethernet LAN, auto sensing
Multiple Host support (AS/400, iSeries, eServer i5, S/390 zSeries, Windows, Unix)
Multiple LAN protocols (SNA, TCP/IP, IPX/SPX, NetBIOS)
Host printing via Telnet (TN5250e and TN3270E), SNA (APPC) or AnyNet
Simple, one step set-up (auto configuration) when using TN5250e or TN3270e
Host controlled Printing, including error reporting, page range printing etc.
I-O's award winning IBM AFP/IPDS and SCS printer emulations
Easy to install and use, includes I-O's PrintControl utility software

Features	Benefits
AFP/IPDS & SCS Printing	IBM host print jobs can be printed on a single Kyocera printer in an Ethernet environment
High Speed Printing, 100+ ppm	Data conversion is accomplished at the 5735km and sent to the printer via the Ethernet LAN - Without the bottleneck of the parallel port the 5735km supports high-speed printing featured in Kyocera printers
I-O Customized Finishing Comands	Kyocera finishing features such as duplexing, collating, stapling, folding, hole-punching, etc. can be utilized in a host environment
Full IBM Host Control of Print Jobs	The 5735km provides bi-directional communication between the host and the printer, via port 9100 and PJL commands
Remote Printing	The printer can be attached locally or remotely via a WAN or VPN network. The printer does not need to be next to the 5735km.
I-O's Award Winning Printer Emulations	All AFP/IPDS and SCS functions such as duplex, page offset, COR, fonts and barcode, are fully supported by the 5735km.
Enhanced Telnet 5250 (TN5250e) and Telnet 3270 (TN3270e)	Communicates with the IBM Host using native TCP/IP.
Page Offset Functions	Provides more flexibility in page positioning with no need to modify host applications.
Supports over 100 AFP/IPDS Fonts	There are more fonts to choose from than other AFP/IPDS interfaces.
On-board FLASH Memory	Allows for field upgrades providing the latest new features from I-O.
Printer error reporting to the host	Prevents loss of host print data by providing the same level of print status reporting as a twinax or coax printer.
Page range printing	Permits users to print select page ranges from large documents and reports.
Off-loading of Data Conversion	Eliminates unnecessary overhead by converting EBCDIC data to ASCII data directly on the I-O 5735km.
Simultaneous, multi-host printing	Maximizes printer utilization by supporting concurrent printing from the host.
10BaseT and 100BaseT	Provides versatility in attaching to LANs at different speeds.
Host auto configuration	Installs in minutes.

Specifications:

Supported Protocols for IBM AS/400, iSeries,
eServer i5, or S/390 zSeries printing:
TCP/IP
- PPR/PPD
- TN5250e
- TN3270e
- AnyNet
SNA (APPC)

Supported IBM SCS Printer Emulation:
- 3812-1
- 4214
- 5225,5225,5256

Supported IBM AFP/IPDS Printer Emulations:
- 4028 AS1
- 3812-2
- 3816-1D/S
- includes 4312/17 font support

IPDS Towers:
- Supports all towers

Supported Printers:
- Port 9100, PJL unsolicited messages
- PCL 3/5e compatible laser printers

System Requirements:
AS/400, iSeries, or eServer i5
- OS/400 Release 3.1 or higher
- PSF/400
Mainframe (OS/390 or MVS)
- PSF/MVS Version 2.2.0 with APR OW15599
- MVS Scheduler with APRA 0212236
- TCP/IP Version 3 Release 1 or higher

Supported Protocols for LAN (ASCII) printing:
- TCP/IP (LPD/LPR)
- Novell IPX/SPX
- NetBIOS
- I-O TCP/IP DirectPort Printing (Windows 95/98,
ME Peer-to-peer)

Supported LAN (ASCII) Hosts:
- Novell (NDS, bindery, PSERVER, RPRINTER)
- Windows 95, 98, NT, 2000, XP
- Windows for Workgroups
- OS/2 Warp, OS/2
- UNIX

FLASH Memory

SNMP Compliant

Supported Ethernet Frame Types:
- IEEE 802.2, 802.3, Ethernet II, SNAP

Supported Ethernet Media:
- 10BaseT, 100BaseT (auto-sensing)

Printer Ports:
- 1 IEEE 1284 bi-directional Centronics parallel port

100-240V (IEC) Auto-Switching Power Supply

I-O Configuration Utility for easy configuration

I-O 5735km

> Request Information

> Pro|Edge Thin Clients

> IBM Host Printing

> IBM Host Connectivity