Special notes for I-O AFP/IPDS Print Servers
=============================================

I-O AFP/IPDS Print Servers are available in three 
models -- the first two models are oriented towards AS/400 
IPDS printing and are both called the I-O 5435.  

The two models differ only in the amount of RAM.  Models 
produced prior to July 1, 2000 are equipped with 4 MB RAM 
while models produced after July 1, 2000 are equipped with 
8 MB RAM.  

The third model is oriented toward IPDS and TN3270e printing from 
IBM Mainframe systems and is identified as the I-O 5435e. 

To ensure that you download the proper bootcode and firmware 
for each of these models, see the following chart:

	I-O 5435 (4 MB)		Bootcode = B5435???.exe
				Firmware = F5435???.exe
	I-O 5435 (8 MB)		Bootcode = B5x35???.exe
				Firmware = F5x35???.exe
	I-O 5435e		Bootcode = B5e35???.exe
				Firmware = F5e35???.exe

The ??? represents the version number. Generally you would want 
to download the most recent release.  The latest release of the 
PrintControl utility (named PCU???.exe) will support all previous
versions of bootcode and firmware on all I-O Print Servers.

If you should attempt to download bootcode or firmware different 
than the specific model of print server, you could cause a lockup 
condition that can only be cleared by shipping the print server 
back to I-O Corporation.  Therefore, be very careful to match the 
right bootcode and firmware with your print server.